My brother lost the disk for his printer and I have it now. Is there any way that i could install it without the cd?
I tried the website for something to download, but only found the cd for 10 dollars.
Help Please!HP Photosmart D5069 Printer [no cd]?
http://h10025.www1.hp.com/ewfrf/wc/softw鈥?/a>
Select the OS you are using.
Download the Basic driver and the Photo Smart Software.
You do not need to buy the CD that is on the other link. That is just an option that you can choose.
Monday, December 21, 2009
Some help with my HP all-in-one printer?Scanning?
I have two computers(lounge + room) and my HP Deskjet F2235 printer is connected up to both printers but it was connected up first with the lounge computer and is USB connected unlike the room one where i added the printer from the control panel. It prints from both computers but only scans to the lounge computer....?
thanks in advance. :)Some help with my HP all-in-one printer?Scanning?
It works on the one because its directly connected via USB cord. If you load the HP software on the other pc I think you may be able to scan to the 2nd one using the HP software.Some help with my HP all-in-one printer?Scanning?
instal hp photo smart utility and scanner driver
thanks in advance. :)Some help with my HP all-in-one printer?Scanning?
It works on the one because its directly connected via USB cord. If you load the HP software on the other pc I think you may be able to scan to the 2nd one using the HP software.Some help with my HP all-in-one printer?Scanning?
instal hp photo smart utility and scanner driver
HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
If it jams at the rear, possibly you have a small piece of paper or card stuck from a previous print. I should check it very carefully. As for new printer, someone suggested laser. Yes, they are very cheap to buy, anyone can buy but you have to think of running costs. The cartridges are much more expensive than inkjets and the time will come when you need a new drum! I've always been more than happy with some of my HP and Epson printers, latterly always getting printer, copier scanner, all in one printer. Godo quality and cost effective to run and no hidden costs. Lots of people who get lasers don't even think about a drum replacement.HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
I have a Lexmark P4350 and have not found anything it will not do. I would not use any other. I have had three printers in four years and this is the best.HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
The epson range are far better not only are the inks cheaper than any other printer manufacturer but they are also excelent quality prints. 拢70 for the printer and 拢2 for each ink cartridge.
I advise everyone to go laser now - there are a ton of cheapish colour lasers available and the per page cost is actually lower than ink nowadays.
Just make sure that the selection that you make has as straight a paper path as possible (applies to ink as well). The problem it sounds like you are having is that the older style printers essentially ask the paper to be dragged around a drum - which was fine when we all used normal paper and didn't use heavier gauges - card - pre punched paper/card etc
I have a Lexmark P4350 and have not found anything it will not do. I would not use any other. I have had three printers in four years and this is the best.HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
The epson range are far better not only are the inks cheaper than any other printer manufacturer but they are also excelent quality prints. 拢70 for the printer and 拢2 for each ink cartridge.
I advise everyone to go laser now - there are a ton of cheapish colour lasers available and the per page cost is actually lower than ink nowadays.
Just make sure that the selection that you make has as straight a paper path as possible (applies to ink as well). The problem it sounds like you are having is that the older style printers essentially ask the paper to be dragged around a drum - which was fine when we all used normal paper and didn't use heavier gauges - card - pre punched paper/card etc
Can someone please help me? I am looking for a driver download for my printer it is a HP Deskjet D2330?
I am using windows 98 SE
Last resort, as My XP broke down today:(
So I had to dig out my oldie, your help is appreciated as I have to get my project doneCan someone please help me? I am looking for a driver download for my printer it is a HP Deskjet D2330?
Hi there
try this
http://h10025.www1.hp.com/ewfrf/wc/softw鈥?/a>
hope it helps.
jitchy skin
Last resort, as My XP broke down today:(
So I had to dig out my oldie, your help is appreciated as I have to get my project doneCan someone please help me? I am looking for a driver download for my printer it is a HP Deskjet D2330?
Hi there
try this
http://h10025.www1.hp.com/ewfrf/wc/softw鈥?/a>
hope it helps.
j
I am trying to use an HP Photosmart D7300 series printer with Windows Vista, tried HP site did not work .?
What about the HP site didn't work? They have Windows Vista drivers for that model on their site.
What's wrong with my HP Deskjet 400 printer??
I'm using HP Deskjet 400 for few years, %26amp; I can say this one is a nice %26amp; tough printer...
However, few days ago I don't know why it become so hard to turn on this printer..
I've checked all the cable, %26amp; all just ok..
I've already tried too in different place, I thought it maybe the electric source, but I found the electric just fine...
So, if anyone please can tell me any thought, what's wrong...it will helps a lot...
Thank you...What's wrong with my HP Deskjet 400 printer??
Once you turn it on, don't turn it off. Or perhaps it is time to invest in a new printer. I know the older model HP's were awesome, but it is a 10 year old printer. Most are lucky to get a year or two out of one.What's wrong with my HP Deskjet 400 printer??
I don't know what you mean by ';hard to turn on';. Is the off / on switch stuck? Does it not respond to the switch being put in the on position?
More detail pls.
it is now time to replace it, it served you well,
However, few days ago I don't know why it become so hard to turn on this printer..
I've checked all the cable, %26amp; all just ok..
I've already tried too in different place, I thought it maybe the electric source, but I found the electric just fine...
So, if anyone please can tell me any thought, what's wrong...it will helps a lot...
Thank you...What's wrong with my HP Deskjet 400 printer??
Once you turn it on, don't turn it off. Or perhaps it is time to invest in a new printer. I know the older model HP's were awesome, but it is a 10 year old printer. Most are lucky to get a year or two out of one.What's wrong with my HP Deskjet 400 printer??
I don't know what you mean by ';hard to turn on';. Is the off / on switch stuck? Does it not respond to the switch being put in the on position?
More detail pls.
it is now time to replace it, it served you well,
Subscribe to:
Posts (Atom)