Hp Psc 500 printer broken.?

I have a HP PSC 500 printer, and it won't turn on. It's plugged in and everything, is there something I can do to get it to turn on?!








Thanks!Hp Psc 500 printer broken.?
First - are all ink cartridges full? MIne will not print if even one of four cartridges is empty.





Second, check the driver to see if it is working correctly:


click Start


Settings


Control Panel


System


Device Manager


locate and right-click on the icon for the device


select Properties


You will be told if the device is working properly and be given the chance to update the driver.





If this doesn't do it -- is it USB connected? Sometimes


you have to reinstall the device - read this:





- With Windows Plug %26amp; Play feature, Windows is supposed to recognize any device plugged into a USB port -- the problem is after it recognizes something once, Plug %26amp; Play will never again try to install that device. You need to erase all memory of the device (printer etc) from the computer.


- Right-click on My Computer, cl Properties, click Hardware, click Device Manager.


- Click on the plus sign next to “Universal Serial Bus.” Look for the problem device’s name and right-click. Now Remove. Restart and reinstall.


Source: Article by James Coates, Chicago Tribune.Hp Psc 500 printer broken.?
check the plug in,check the back plug in,check the in side the printer.
Make sure that each section of the power cord is securely connected. If that doesn't fix the problem, ';wiggle'; the cord at each connection while pressing the printer power switch to see if you have a problem in the wiring such as loose wire or bad cable. - whatever. Good luck