Monday, December 21, 2009

HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?

If it jams at the rear, possibly you have a small piece of paper or card stuck from a previous print. I should check it very carefully. As for new printer, someone suggested laser. Yes, they are very cheap to buy, anyone can buy but you have to think of running costs. The cartridges are much more expensive than inkjets and the time will come when you need a new drum! I've always been more than happy with some of my HP and Epson printers, latterly always getting printer, copier scanner, all in one printer. Godo quality and cost effective to run and no hidden costs. Lots of people who get lasers don't even think about a drum replacement.HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
I have a Lexmark P4350 and have not found anything it will not do. I would not use any other. I have had three printers in four years and this is the best.HP psc 1215 jams at rear when trying to print business cards on A4. Any suggestions for a new printer?
The epson range are far better not only are the inks cheaper than any other printer manufacturer but they are also excelent quality prints. 拢70 for the printer and 拢2 for each ink cartridge.
I advise everyone to go laser now - there are a ton of cheapish colour lasers available and the per page cost is actually lower than ink nowadays.





Just make sure that the selection that you make has as straight a paper path as possible (applies to ink as well). The problem it sounds like you are having is that the older style printers essentially ask the paper to be dragged around a drum - which was fine when we all used normal paper and didn't use heavier gauges - card - pre punched paper/card etc

No comments:

Post a Comment